NOISEKILLER LIQUID
|
Noisekiller is a latex paint which is mass fortified to apply to metal surfaces to control noise. Vibratory feeder bowls, duct work, and other “tinning” noise producing sources. It literally removes unwanted noise and vibrations by converting them into low grade heat. NoiseKiller liquid was created as a complete noise dampening product line for almost every type of noise or vibration, shock or impact problem. |
|
|
Instead of trying to cover up the sound, NoiseKiller Liquid works like a cure for the vibration problem. It actually gets rid of the vibration by converting it into low-grade heat. This "Viscoelastic" conversion is what happens when you use NoiseKiller Liquid. Spray on NoiseKiller to stop unwanted vibrations and sounds in almost anything. Everything from a car that's too loud at freeway speed to a large factory with heavy equipment can benefit from the use of NoiseKiller products. Examples of how NoiseKiller is used in today's modern industry: Suggested Uses for NoiseKiller Liquid:
Now NoiseKiller is available to everyone. Perfect for your home Street Rod or restoration project. Since it's water based, anyone can safely use it, plus mistakes are easily fixed with a wet rag. Better yet, it dries to a waterproof seal which means you won't every have to worry about it again.
Installation Instructions: Apply NoiseKiller Liquid to surface with a slow sweeping motion 10-12" away. Use 2 thin coats, building up to the thickness of the surface being sprayed. Wait an hour between coats. Allow 24 hours to cure for max sound damping. NoiseKiller is waterbased so it cleans up easily with water. No sealing is required. When totally cured, NoiseKiller is waterproof and can be sanded and painted. |
|
| To speak with a
Memtech Acoustical consultant about NoiseKiller
Liquid,
contact Memtech Acoustical
LLC
|
|
